How to use the peanut shelling machine

Now more and more farmers begin to use peanut shelling machine. Therefore, some of them can not make full use the machine’s capacity due to not mastering how to use peanut shelling machine. It not only has bad performance of shelling with low efficiency, but also is easy to injure worker. The author would like to introduce how to use the peanut shelling machine.

6BK-3500 Peanut Shelling Machine

1. The requirement for the peanut shelling machine. The machine should has clean shelling, high efficiency and are equipped with the cleaning device with high degree of cleaning; low loss rate, small breaking rate; simple structure, reliable, easy to adjust, less energy consumption and a certain kind of universality. It can be used for shelling of varied crops, to improve the utilization rate of machine.


2. The requirement for the peanut (with shell). The peanut should be not too dry or too wet. If they are too dry, the breaking rate is high; if they are too wet, it will affect the work efficiency. There are several ways to get the proper moisture content of material.
1).shelling in winter. Before shelling, use about 10kg warm water to spread on about 50kg peanut, and cover the peanut with plastic film( in other season, 6 hours for covering is ok). Then put the peanut under the sunshine for drying about 1 hour before shelling.

2). put the drying peanut into the water pond, fish out them after soaking, then cover the peanut by plastic film for about one day. Then put the peanut under the sunshine for drying, shelling the peanut before they are proper in moisture content. 　　

Since founding, KMEC of He Nan province has always based on the high quality to manufacture the good quality peanut machine to provide the continuous assistance to the peanut food processing manufacture.

Peanut shelling machine video 
The points need to note when using the peanut sheller
Utilization of peanut shell
Introduction and instructions of the peanut shelling machine